75mm Timber Frame Tie
75mm Timber Frame Tie
Price: £0.33 (£0.40 inc VAT)
- Product Code: A1-5522
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TFT75
- Weight: 13.00g
75mm Timber Frame Tie
Length: 75mm
Weight: 13g
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South East of England where basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square meter.
Features
- Complies with a DD140 Type 6 tie.
- Meets with the appropriate parts of NHBC standards.
- Supplied with annular ring shank nails included.
Specification
- Grade 1.4301 austenitic stainless steel to EN 10088-2.
- Tested by CERAM Research Ltd.
Installation
- Suitable at a density of 4.4 ties per square metre for buildings anywhere in the South East of England where the basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square metre
Brand: TECO
Model: WM50x150
Delivery Time: 2 - 4 days
50mm x 150mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.05
£2.46 inc VAT
Brand: TECO
Model: ARH
Delivery Time: In stock, 1-2 days
90mm Handed Arris Rail Brackets are suitable for fitting plain unended Arris rails to blank posts. Made from galvanised steel EN 10346 DX51D Z275.This Arris rail support bracket allows a triangular Arris rail to be attached to a post without the need for a mortise hole in the post or the rail b..
£3.75
£4.50 inc VAT
Brand: TECO
Model: TDS250/10
Delivery Time: In stock, 1-2 days
250mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£13.00
£15.60 inc VAT
Brand: TECO
Model: NUTFBZPM20
Delivery Time: In stock, 1-2 days
M20 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£19.31
£23.17 inc VAT
Brand: TECO
Model: WM132x150
Delivery Time: 2 - 4 days
132mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£8.01
£9.61 inc VAT
Brand: TECO
Model: CSHBZPM6x25
Delivery Time: In stock, 1-2 days
6mm - 25mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied complete w..
£31.80
£38.16 inc VAT