75mm Timber Frame Tie
75mm Timber Frame Tie
Price: £0.33 (£0.40 inc VAT)
- Product Code: A1-5522
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TFT75
- Weight: 13.00g
75mm Timber Frame Tie
Length: 75mm
Weight: 13g
75mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South East of England where basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square meter.
Features
- Complies with a DD140 Type 6 tie.
- Meets with the appropriate parts of NHBC standards.
- Supplied with annular ring shank nails included.
Specification
- Grade 1.4301 austenitic stainless steel to EN 10088-2.
- Tested by CERAM Research Ltd.
Installation
- Suitable at a density of 4.4 ties per square metre for buildings anywhere in the South East of England where the basic wind speed does not exceed 44 m/s and for buildings on town and city sites in areas where the basic wind speed does not exceed 52 m/s. In more severe situations the tie density should be increased to 7 ties per square metre
Brand: TECO
Model: TCDS 63mm M12
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.40
£0.48 inc VAT
Brand: TECO
Model: GBCLIP150/50
Delivery Time: In stock, 1-2 days
150mm Galvanised Gravel Board Clips for fitting gravel boards securely to timber fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.48
£1.78 inc VAT
Brand: TECO
Model: WM75x250
Delivery Time: 2 - 4 days
75mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.50
£6.60 inc VAT
Brand: TECO
Model: LD220F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 220mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.55
£0.66 inc VAT
Brand: TECO
Model: WST
Delivery Time: In stock, 1-2 days
Stainless Steel Wall Starter systems WST join new walls to existing masonry, suitable for both internal and external brick or block walls. The connectors can be slotted together up to a maximum of 8 metres or 3 storeys high, from 60 to 250mm thick. Type WST is made from Austenitic Stainless Steel (G..
£11.08
£13.30 inc VAT
Brand: TECO
Model: EMLS100
Delivery Time: In stock, 1-2 days
100mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.G..
£31.37
£37.64 inc VAT