Heavy Duty Restraint Strap 1000mm Flat

Heavy Duty Restraint Strap 1000mm Flat
Rate this product
Heavy Duty Restraint Strap 1000mm Flat
Price: £2.99 (£3.59 inc VAT)
  • Product Code: A1-5394
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1000F
  • Weight: 930.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Heavy Duty Restraint Strap 1000mm Flat

Length: 1000mm
Width: 28mm
Thickness: 5mm
Weight: 930g

Galvanised Heavy Duty Restraint Strap 1000mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

INSTALLATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

76x300mm Girder Truss Shoe
Brand: TECO Model: GTS - 76x300
Delivery Time: In stock, 1-2 days
76x300mm Girder Truss Shoe
76mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to fa..
£3.33
£4.00 inc VAT
50x600mm Woody Long Leg Joist Hanger
Brand: TECO Model: LL - 50x600
Delivery Time: In stock, 1-2 days
50x600mm Woody Long Leg Joist Hanger
50mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to  EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product also off..
£4.08
£4.90 inc VAT
100x175mm Welded Masonry Joist Hanger
Brand: TECO Model: WM100x175
Delivery Time: 2 - 4 days
100x175mm Welded Masonry Joist Hanger
100mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber..
£7.85
£9.42 inc VAT
225mm Stainless Steel Housing Tie - pack of 50
Brand: TECO Model: WT-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie - pack of 50
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements of BS EN..
£9.29
£11.15 inc VAT
75mm x 30m Stainless Steel Soffit Vent Mesh
Brand: TECO Model: SVM
Delivery Time: In stock, 1-2 days
75mm x 30m Stainless Steel Soffit Vent Mesh
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
75x295 Woody No Tag Joist Hanger
Brand: TECO Model: WNT - 75x295
Delivery Time: In stock, 1-2 days
75x295 Woody No Tag Joist Hanger
75mm x 295mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.61
£0.73 inc VAT