50x225mm Welded Masonry Joist Hanger
50x225mm Welded Masonry Joist Hanger
Price: £2.61 (£3.13 inc VAT)
- Product Code: A1-5101
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM50x225
- Weight: 660.00g
50x225mm Welded Masonry Joist Hanger
Width: 50mm
Height: 215mm
Weight: 660g
50mm x 225mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 50x225mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: FBG
Delivery Time: In stock, 1-2 days
20mm wide versatile multi purpose banding that can be cut, bent and formed for all types of light applications. Galvanised steel EN to 10346 DX51D Z275 0.9mm thick. Holes: 3.75, M10 round, M10 & M8 square. The square holes are suitable for cup square hex (coach bolts)...
£8.14
£9.77 inc VAT
Brand: TECO
Model: TDS250/10
Delivery Time: In stock, 1-2 days
250mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£13.00
£15.60 inc VAT
Brand: TECO
Model: WS75x225S100
Delivery Time: 2 - 4 days
Straddle: 100mm75mm x 225mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned dire..
£12.54
£15.05 inc VAT
Brand: TECO
Model: HD1500F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£4.48
£5.38 inc VAT
Brand: TECO
Model: PBPS20/122
Delivery Time: In stock, 1-2 days
Plaster depth 20-22mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£4.09
£4.91 inc VAT
Brand: TECO
Model: DWS25
Delivery Time: In stock, 1-2 days
3.5x25mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mm Bugle head Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£9.58
£11.50 inc VAT