90x150mm Welded Masonry Joist Hanger
90x150mm Welded Masonry Joist Hanger
Price: £4.45 (£5.34 inc VAT)
- Product Code: A1-5122
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WM90x150
- Weight: 772.00g
90x150mm Welded Masonry Joist Hanger
Width: 90mm
Height: 150mm
Weight: 772g
90mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber and timber to steel applications, where masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.
Installation of 90x150mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: FHM47/125
Delivery Time: In stock, 1-2 days
47mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.99
£2.39 inc VAT
Brand: TECO
Model: TCDS 50mm M16
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M16 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT
Brand: TECO
Model: HD1300F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1300mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£3.82
£4.58 inc VAT
Brand: TECO
Model: FHMR47X175R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.05
£4.86 inc VAT
Brand: TECO
Model: P8X50
Delivery Time: In stock, 1-2 days
8mm Universal Nylon Plug is a standard plug for 8mm hole diameter and 41mm in length. Suitable for hollow and solid base materials. FeaturesAnchor hole size - 8mmPlug length - 41mmMin. anchor hole length - 55mmWood screw size - 4.5mm to 6mm ..
£0.10
£0.12 inc VAT
Brand: TECO
Model: STD - 47x277
Delivery Time: In stock, 1-2 days
47x277mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significant..
£0.95
£1.14 inc VAT