Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Heavy Duty Restraint Strap 1300mm Flat

Heavy Duty Restraint Strap 1300mm Flat
Price: £3.88 (£4.66 inc VAT)
  • Product Code: A1-5406
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: HD1300F
  • Weight: 1,209.00g
Show other lengths

Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Quantity

Galvanised Heavy Duty Restraint Strap 1300mm Flat

Length: 1300mm
Width: 28mm
Thickness: 5mm
Weight: 1209g

Galvanised Heavy Duty Restraint Strap 1300mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

INSTALLATION

For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

Brand: TECO Model: PB13/19
Delivery Time: In stock, 1-2 days
Plaster depth 13-19mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impac..
£4.18
£5.02 inc VAT
Brand: TECO Model: MFT44/346BA - 44x151
Delivery Time: In stock, 1-2 days
44mm x 151mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.28
£2.74 inc VAT
Brand: TECO Model: STUDBZPM12
Delivery Time: In stock, 1-2 days
M12 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£2.40
£2.88 inc VAT
Brand: TECO Model: CSHBZPM10x75
Delivery Time: In stock, 1-2 days
10mm - 75mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied comp..
£24.11
£28.93 inc VAT
Brand: TECO Model: WM100x300
Delivery Time: 2 - 4 days
100mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£12.93
£15.52 inc VAT
Brand: TECO Model: FHMR47X200R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£6.51
£7.81 inc VAT

Rate this product

Please login or register to review