165mm Helical Flat Roof Fixings for 96-126mm panels
165mm Helical Flat Roof Fixings for 96-126mm panels
Price: £0.58 (£0.70 inc VAT)
- Product Code: A1-5755
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HFR165
- Weight: 19.00g
165mm Helical Flat Roof Fixings for 96-126mm panels
Length: 165mm
Weight: 19g
165mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 96-126mm thick panels.
Features
- 8mm diameter.
- Large 20mm head.
- Quick installation - no drilling, no need for screws.
- Unique one piece to prevent bending during installation.
- High performance.
- Minimal compression of insulation.
- Improved thermal bridging.
Installation
- Allow 24 no. Suretwist per panel.
Brand: TECO
Model: LL - 125x450
Delivery Time: In stock, 1-2 days
125x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£5.16
£6.19 inc VAT
Brand: TECO
Model: SFT130
Delivery Time: In stock, 1-2 days
Stainless Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Grade 1.4301 austenitic stainless steel to EN 10088-2. Threaded one end. Screw directly into timber using a small pilot hole if required. - 3mm..
£108.58
£130.30 inc VAT
Brand: TECO
Model: ERSS3
Delivery Time: In stock, 1-2 days
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£5.42
£6.50 inc VAT
Brand: TECO
Model: HD900B150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 900mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£2.69
£3.23 inc VAT
Brand: TECO
Model: WM63x300
Delivery Time: 2 - 4 days
63mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£7.59
£9.11 inc VAT
Brand: TECO
Model: HI300/4
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
£2.60
£3.12 inc VAT