175mm Stainless Steel Coiled Mesh Lath - 20m length
175mm Stainless Steel Coiled Mesh Lath - 20m length
Price: £45.45 (£54.54 inc VAT)
- Product Code: A1-5570
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: EMLS175
- Weight: 2,530.00g
175mm Stainless Steel Coiled Mesh Lath - 20m length
Length: 20000mm
Width: 175mm
Weight: 2530g
175mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking.
Specification
- Galvanised steel EN 10346 DX51D Z275,
- Available in 20 metre coils
Installation
- Overlap by a minimum of 75mm when joining two lengths together.
- Gloves should be worn as edges will be sharp.
Brand: TECO
Model: HWTNT80
Delivery Time: 2 - 3 Days
80mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£8.06
£9.67 inc VAT
Brand: TECO
Model: TCDS 50mm M10
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT
Brand: TECO
Model: NP41x152
Delivery Time: In stock, 1-2 days
41x152mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£27.56
£33.07 inc VAT
Brand: TECO
Model: CSHBZPM12x220
Delivery Time: In stock, 1-2 days
12mm - 220mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£21.14
£25.37 inc VAT
Brand: TECO
Model: NUTFBZPM12
Delivery Time: In stock, 1-2 days
M12 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£11.11
£13.33 inc VAT
Brand: TECO
Model: WM75x150
Delivery Time: 2 - 4 days
75mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.43
£5.32 inc VAT