Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

200mm Stainless Steel Housing Tie - pack of 50

200mm Stainless Steel Housing Tie - pack of 50
200mm Stainless Steel Housing Tie - pack of 50
Price: £9.41 (£11.29 inc VAT)
  • Product Code: A1-5488
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: WT-200/50
  • Weight: 570.00g
Show other lengths

200mm Stainless Steel Housing Tie - pack of 50

Length: 200mm
Weight: 570g
200mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.



Specification 
  • Fully tested to BS EN846-5:2000
  • Meets the requirements of BS EN 845-1:2003.
  • Housing Ties meet the requirements of Part E of the Building Regulations for Type A in party walls of any height, which states that a masonry cavity wall tie can only be used if the measured dynamic stiffness is less than 4.8MN/m.  
Features 
  • Tangle free - saves time and money. Supplied in bundles - practical benefits for the bricklayer.
  • Safety on site.
  • Better storage particularly during inclement weather.
  • Unique crossed and closed end prevents entanglement. 
 
Brand: TECO Model: FHMR47X175R100
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.56
£4.27 inc VAT
Brand: TECO Model: FHM50/125
Delivery Time: In stock, 1-2 days
50mm x 125mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.07
£2.48 inc VAT
Brand: TECO Model: FFCPG150
Delivery Time: In stock, 1-2 days
100mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in galva..
£0.34
£0.41 inc VAT
Brand: TECO Model: NP85x350
Delivery Time: In stock, 1-2 days
85x350mm versatile plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings. Always e..
£82.50
£99.00 inc VAT
Brand: TECO Model: HM900
Delivery Time: In stock, 1-2 days
Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..
£52.73
£63.28 inc VAT
Brand: TECO Model: GB490
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast..
£55.76
£66.91 inc VAT