44x68mm Mini Mini Joist Hanger
44x68mm Mini Mini Joist Hanger
Price: £0.53 (£0.64 inc VAT)
- Product Code: A1-5017
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MMINI - 44x68
- Weight: 96.00g
44x68mm Mini Mini Joist Hanger
Width: 44mm
Height: 68mm
Thickness: 1mm
Weight: 96g
44x68mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate locationing. This tag can easily be bent. The joist bearing is 50mm. Long term safe working load = 3.47 kN.
FIXING INSTRUCTIONS for 44x68mm Mini Mini Joist Hanger
All holes should be nailed using 30 x 3.75 Square Twist Nails or equivalent
SPECIFICATION
- Galvanised Steel EN 10346 DX51D Z275,
- Test by CERAM Research Ltd Notification Body No. 1289.
Mini-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: NKG
Delivery Time: In stock, 1-2 days
30x3.75mm Galvanised Square Twist Nails are ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire nail. Approx. 400 nails per kilo in a bag. Nail directly into timber...
£4.50
£5.40 inc VAT
Brand: TECO
Model: GGBOLT - M20x180
Delivery Time: In stock, 1-2 days
Size: M20 x 180mmM20 x 180mm Multi Truss Girder Hanger Bolt is a Heavy Duty Girder to Girder Hanger Bolt. The product also offers substantial safe working load of 29kN, tested by BRE.The bolts sets include 120 mm thread 3 no. M20 x 180 XOX BZP Bolts, 3 no. M20 x 65mm BZP Round Washers..
£23.51
£28.21 inc VAT
Brand: TECO
Model: NPSTD85x175
Delivery Time: In stock, 1-2 days
85x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropria..
£33.00
£39.60 inc VAT
Brand: TECO
Model: WM75x150
Delivery Time: 2 - 4 days
75mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.43
£5.32 inc VAT
Brand: TECO
Model: PSTCG3
Delivery Time: In stock, 1-2 days
3mm Thin Coat Plaster Stop bead is for use on traditional wet 2 or 3 coat plaster application, it provides a precise, clean edge to render where it butts up to other materials such as a door or window frame, reinforcing the edges of the plaster. In external applications and where there is regul..
£3.84
£4.61 inc VAT
Brand: TECO
Model: ARH
Delivery Time: In stock, 1-2 days
90mm Handed Arris Rail Brackets are suitable for fitting plain unended Arris rails to blank posts. Made from galvanised steel EN 10346 DX51D Z275.This Arris rail support bracket allows a triangular Arris rail to be attached to a post without the need for a mortise hole in the post or the rail b..
£3.75
£4.50 inc VAT