90x128mm Multifunctional Joist Hanger
90x128mm Multifunctional Joist Hanger
Price: £2.28 (£2.74 inc VAT)
- Product Code: A1-5264
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT90/346BA - 90x128
- Weight: 429.00g
90x128mm Multifunctional Joist Hanger
Width: 90mm
Height: 128mm
Thickness: 2mm
Weight: 429g
90mm x 128mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 90x128mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: WTGP-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£66.00
£79.20 inc VAT
Brand: TECO
Model: FHM47/225
Delivery Time: In stock, 1-2 days
47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.82
£3.38 inc VAT
Brand: TECO
Model: HD600B100
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 600mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APPL..
£1.79
£2.15 inc VAT
Brand: TECO
Model: WTIC50
Delivery Time: In stock, 1-2 days
The Universal Wall Tie Insulation Clip is a retaining clip used to hold insulation material against the inner wall of a cavity.Specification Universal retaining clip. Clip straight on to Wall Tie...
£4.56
£5.47 inc VAT
Brand: TECO
Model: EMLS175
Delivery Time: In stock, 1-2 days
175mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.G..
£50.17
£60.20 inc VAT
Brand: TECO
Model: HWTNT50
Delivery Time: 2 - 3 Days
50mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.53
£5.44 inc VAT