Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

300ml Polyester Resin Tube

300ml Polyester Resin Tube
Price: £14.80 (£17.76 inc VAT)
  • Product Code: A1-5844
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: RESINPS

300ml Polyester Resin Tube

Width: 6mm
300mm Polyester Resin is designed to aid and add strength to anchors or fixings, threaded studs, internal threaded sockets and rebar. Can be used in brickwork, concrete and most natural stone. Supplied with mixer nozzle.
 
Features
  • Styrene free.
  • Expansion free.
  • Easy to dispense.
  • Close spacing and edge distance.
Installation
  • Drill the hole to the correct diameter and depth.
  • Thoroughly clean the hole.
  • Insert the mixer nozzle to the bottom of the hole.
  • Begin to extrude  the resin and slowly withdraw the mixer nozzle from the hole ensuring that there are no air voids as the mixer nozzle is withdrawn.
  • Fill the hole to approximately to full and remove the mixer nozzle completely.
  • Insert the clean threaded bar to the bottom of the hole using a back and forth twisting motion ensuring all the threads are thoroughly coated.
  • Any excess resin should be expelled from the hole evenly around the steel element and around the mouth of the hole before it sets.
  • Leave the anchor to cure.
  • Do not disturb the anchor until the appropriate loading/curing time has elapsed. 
Brand: TECO Model: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT
Brand: TECO Model: WR63X250R100
Delivery Time: 2 - 4 days
63mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£6.15
£7.38 inc VAT
Brand: TECO Model: GGBOLT - M20x180
Delivery Time: In stock, 1-2 days
Size: M20 x 180mmM20 x 180mm Multi Truss Girder Hanger Bolt is a Heavy Duty Girder to Girder Hanger Bolt. The product also offers substantial safe working load of 29kN, tested by BRE.The bolts sets include 120 mm thread 3 no. M20 x 180 XOX BZP Bolts, 3 no. M20 x 65mm BZP Round Washers..
£23.51
£28.21 inc VAT
Brand: TECO Model: WM75x150
Delivery Time: 2 - 4 days
75mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.43
£5.32 inc VAT
Brand: TECO Model: WT-275/250
Delivery Time: In stock, 1-2 days
275mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from up to 150mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements..
£72.00
£86.40 inc VAT
Brand: TECO Model: DWS60
Delivery Time: In stock, 1-2 days
3.5x60mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mmBugle head  Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£11.23
£13.48 inc VAT

Rate this product

Please login or register to review