42x175mm Galvanised Nail Plate - box of 100
42x175mm Galvanised Nail Plate - box of 100
Price: £46.80 (£56.16 inc VAT)
- Product Code: A1-5795
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: NP41x152
- Weight: 6,700.00g
42x175mm Galvanised Nail Plate - box of 100
Length: 175mm
Width: 42mm
Weight: 6700g
42x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275.
Installation
- Use appropriate fixings. Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
Brand: TECO
Model: DPC450
Delivery Time: In stock, 1-2 days
450mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..
£15.58
£18.70 inc VAT
Brand: TECO
Model: LL - 44x450
Delivery Time: In stock, 1-2 days
44x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£3.41
£4.09 inc VAT
Brand: TECO
Model: LL - 38x450
Delivery Time: In stock, 1-2 days
38x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. ..
£3.41
£4.09 inc VAT
Brand: TECO
Model: WT-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£33.00
£39.60 inc VAT
Brand: TECO
Model: EB3x13
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£3.23
£3.88 inc VAT
Brand: TECO
Model: WM63x225
Delivery Time: 2 - 4 days
63mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.11
£6.13 inc VAT