100x450mm Woody Long Leg Joist Hanger
100x450mm Woody Long Leg Joist Hanger
Price: £4.76 (£5.71 inc VAT)
- Product Code: A1-5042
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 100x450
- Weight: 511.00g
100x450mm Woody Long Leg Joist Hanger
Width: 100mm
Height: 450mm
Thickness: 1.4mm
Weight: 511g
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. This joist hanger ls also available in Grade 1.4301 austenitic stainless steel to EN 10088-2.
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 100x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: HI300P
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so ..
£1.94
£2.33 inc VAT
Brand: TECO
Model: LL - 125x450
Delivery Time: In stock, 1-2 days
125x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£5.09
£6.11 inc VAT
Brand: TECO
Model: LD450B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 450mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£0.78
£0.94 inc VAT
Brand: TECO
Model: FHMR140
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.21
£1.45 inc VAT
Brand: TECO
Model: TBHEX10x100
Delivery Time: In stock, 1-2 days
10x100 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fi..
£55.59
£66.71 inc VAT
Brand: TECO
Model: FB50
Delivery Time: In stock, 1-2 days
50x50mm Galvanised steel, powder coated Bolt Down Shoe. A fence post supports in both standard and heavy duty. Hole size M10. Installation To bolt down onto existing concrete. Suggested fixing 10 x 80mm sleeve anchor...
£10.59
£12.71 inc VAT