47x100mm - R215mm Masonry Return Hanger
47x100mm - R215mm Masonry Return Hanger
Price: £3.70 (£4.44 inc VAT)
- Product Code: A1-5720
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X100R215
- Weight: 496.00g
47x100mm - R215mm Masonry Return Hanger
Width: 47mm
Height: 100mm
Weight: 496g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x100mm - R215mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: WM50x150
Delivery Time: 2 - 4 days
50mm x 150mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£2.05
£2.46 inc VAT
Brand: TECO
Model: GTS - 100x300
Delivery Time: In stock, 1-2 days
100mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significantly contribute to f..
£3.65
£4.38 inc VAT
Brand: TECO
Model: TRS800B100
Delivery Time: In stock, 1-2 days
800mm bent 100mm Ron Sammons strap is a lightweight restraint strap that can be used instead of a traditional Heavy Duty Strap to provide lateral restraint of roof trusses, rafters and joists tied to masonry and for vertical applications such as holding down the wall plate. Designed to The..
£1.45
£1.74 inc VAT
Brand: TECO
Model: MFT47/404BA - 47x179
Delivery Time: In stock, 1-2 days
47mm x 179mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.58
£3.10 inc VAT
Brand: TECO
Model: WSS4x40
Delivery Time: In stock, 1-2 days
4x40mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£23.40
£28.08 inc VAT
Brand: TECO
Model: SHORTLEG - 38x216
Delivery Time: In stock, 1-2 days
38mm x 216mm Woody Short Leg Joist Hanger is produced from 1mm thick pre-galvanised mild steel produced in accordance to EN BS 10327:2004 DX51D+Z275. It has a shortened leg, and with a 50mm joist bearing. The hanger includes a base tag which can significantly contrib..
£0.78
£0.94 inc VAT