47x200mm - R150mm Masonry Return Hanger
47x200mm - R150mm Masonry Return Hanger
Price: £4.19 (£5.03 inc VAT)
- Product Code: A1-5740
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X200R150
- Weight: 618.00g
47x200mm - R150mm Masonry Return Hanger
Width: 47mm
Height: 200mm
Weight: 618g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x200mm - R150mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: WR90X200R100
Delivery Time: 2 - 4 days
90mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.70
£6.84 inc VAT
Brand: TECO
Model: MMINI - 50x65
Delivery Time: In stock, 1-2 days
50x65mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate lo..
£0.53
£0.64 inc VAT
Brand: TECO
Model: HD1200F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£3.39
£4.07 inc VAT
Brand: TECO
Model: HD1000B150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1000mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£2.83
£3.40 inc VAT
Brand: TECO
Model: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT
Brand: TECO
Model: WM44x100
Delivery Time: 2 - 4 days
44mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£1.90
£2.28 inc VAT