50mm Woody Truss Clip
50mm Woody Truss Clip
Price: £0.31 (£0.37 inc VAT)
- Product Code: A1-5774
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: TCW50
- Weight: 80.00g
50mm Woody Truss Clip
Width: 50mm
Weight: 80g
50mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe working load = 3.18 kN.
Installation
- All holes should be nailed using 12 nos 30 x 3.75 square twist nails or equivalent.
Truss-Clips_data_sheet.pdf
Brand: TECO
Model: LD200B50
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Bent 50mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£0.53
£0.64 inc VAT
Brand: TECO
Model: P8X50
Delivery Time: In stock, 1-2 days
8mm Universal Nylon Plug is a standard plug for 8mm hole diameter and 41mm in length. Suitable for hollow and solid base materials. FeaturesAnchor hole size - 8mmPlug length - 41mmMin. anchor hole length - 55mmWood screw size - 4.5mm to 6mm ..
£0.10
£0.12 inc VAT
Brand: TECO
Model: HM900
Delivery Time: In stock, 1-2 days
Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..
£52.73
£63.28 inc VAT
Brand: TECO
Model: HD1500F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£4.24
£5.09 inc VAT
Brand: TECO
Model: WM44x150
Delivery Time: 2 - 4 days
44mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many ti..
£2.05
£2.46 inc VAT
Brand: TECO
Model: WSTDGM12
Delivery Time: In stock, 1-2 days
Diameter: 24mm M12 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use gal..
£1.81
£2.17 inc VAT