38x233mm Multifunctional Joist Hanger
38x233mm Multifunctional Joist Hanger
Price: £3.05 (£3.66 inc VAT)
- Product Code: A1-5247
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT38/504BA - 38x233
- Weight: 624.00g
38x233mm Multifunctional Joist Hanger
Width: 38mm
Height: 233mm
Thickness: 2mm
Weight: 624g
38mm x 233mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 10.45 kN.
FIXING INSTRUCTIONS for 38x233mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: HI240/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tile..
£1.79
£2.15 inc VAT
Brand: TECO
Model: AR12
Delivery Time: In stock, 1-2 days
300mm Arris Rail Bracket is suitable for securing arris rails to a square fence post when building a feather edge fence or to repair a broken wooden arris rail to an existing post. Made from galvanised steel EN 10346 DX51D Z275.Installation &nbs..
£1.20
£1.44 inc VAT
Brand: TECO
Model: WM100x275
Delivery Time: 2 - 4 days
100mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£9.90
£11.88 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£13.64
£16.37 inc VAT
Brand: TECO
Model: PNP14
Delivery Time: In stock, 1-2 days
14mm Nylon Plug is a standard nylon plug for 14mm hole diameter and 70mm in length. Suitable for solid base materials. FeaturesAnchor hole size - 14mmPlug length - 70mmMin. anchor hole length - 80mmWood screw size - 10mm to 12mm ..
£0.31
£0.37 inc VAT
Brand: TECO
Model: TDS100/25
Delivery Time: In stock, 1-2 days
100mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£10.48
£12.58 inc VAT