6mm Helical Bar Stainless Steel - 1m length
6mm Helical Bar Stainless Steel - 1m length
Price: £4.60 (£5.52 inc VAT)
- Product Code: A1-5511
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HBH6/1000
- Weight: 60.00g
6mm Helical Bar Stainless Steel - 1m length
Length: 1000mm
Thickness: 6mm
Weight: 60g
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard reinforcing materials. Stainless steel grade 304 (grade 316 available on request).
Features
- Grade 304 austenitic stainless steel (grade 316 available to order).
- Excellent bonding capabilities.
- Coiled spring properties within elastic limit.
- High stress material.
- No sudden or catastrophic failure point.
- Less intrusive than standard repairs.
Installation
- Rake or cut slots into horizontal mortar joint to a depth of between 25-35mm and a 450mm or 6 brick courses vertical spacing.
- Vacuum out the slots and thoroughly flush with water.
- Mix the two part Grout (HG3) in the tub provided.
- Insert a bead of Grout into the back of the slot using a grout gun.
- Push the Helical Bar into the Grout to obtain good coverage.
- Insert a bead of Grout over the exposed Helical Bar and iron into the slot using a finger trowel. Fill in the slot with Grout leaving sufficient depth for re pointing.
- Use a colour matched mortar to repair fractured bricks.
- Re-point the slot to match existing as closely as possible and make good the area.
- If in doubt, seek advice from a structural engineer.
Brand: TECO
Model: FHMR47X125R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£4.21
£5.05 inc VAT
Brand: TECO
Model: WR44X250R100
Delivery Time: 2 - 4 days
44mm x 250mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.98
£5.98 inc VAT
Brand: TECO
Model: WTDT-250/250
Delivery Time: In stock, 1-2 days
Stainless Steel Double Triangle Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requ..
£108.00
£129.60 inc VAT
Brand: TECO
Model: HD1200B150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£3.58
£4.30 inc VAT
Brand: TECO
Model: HM900
Delivery Time: In stock, 1-2 days
Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..
£52.73
£63.28 inc VAT
Brand: TECO
Model: WR44X200R100
Delivery Time: 2 - 4 days
44mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.60
£5.52 inc VAT
Related Products
Brand: TECO
Model: H6/1000
Delivery Time: In stock, 1-2 days
6mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new an..
£87.71
£105.25 inc VAT