50x450mm Woody Long Leg Joist Hanger
50x450mm Woody Long Leg Joist Hanger
Price: £3.36 (£4.03 inc VAT)
- Product Code: A1-5040
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: LL - 50x450
- Weight: 465.00g
50x450mm Woody Long Leg Joist Hanger
Width: 50mm
Height: 450mm
Thickness: 1.4mm
Weight: 465g
Long term safe working load = 11.68 kN. The hangers have been accordingly tested by Ceram Research. Test results are available upon request.
FIXING INSTRUCTIONS for 50x450mm Woody Long Leg Joist Hanger
- All available holes should be nailed using 30 x 3.75 square twist galvanised nails or equivalent, for stainless steel use 30 x 3.75 annular ring shank nails.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model and Size: WR90X200R100
Delivery Time: 2 - 4 days
90mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£5.70
£6.84 inc VAT
Brand: TECO
Model and Size: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT
Brand: TECO
Model and Size: TFT50
Delivery Time: In stock, 1-2 days
50mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.30
£0.36 inc VAT
Brand: TECO
Model and Size: LD600T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm..
£1.04
£1.25 inc VAT
Brand: TECO
Model and Size: HWTNT90
Delivery Time: 2 - 3 Days
90mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAl..
£4.56
£5.47 inc VAT