38x312 Woody No Tag Joist Hanger
38x312 Woody No Tag Joist Hanger
Price: £0.60 (£0.72 inc VAT)
- Product Code: A1-5004
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: WNT - 38x312
- Weight: 192.00g
38x312 Woody No Tag Joist Hanger
Width: 38mm
Height: 312mm
Thickness: 0.8mm
Weight: 192g
38mm x 312mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainless Steel. Long term safe working load = 6 kN.
tag_install.png)
FIXING INSTRUCTIONS for 38x312 Woody No Tag Joist Hanger
- All holes should be nailed using 30 x 3.75 square twist nails or equivalent, for stainless steel products use 30 x 3.75 stainless steel annular ring shank nails.Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 60mm,
- Also available in Stainless Steel,
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers.pdf
Brand: TECO
Model: US4x20
Delivery Time: In stock, 1-2 days
4x20mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£4.65
£5.58 inc VAT
Brand: TECO
Model: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.04
£1.25 inc VAT
Brand: TECO
Model: WM63x200
Delivery Time: 2 - 4 days
63mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£4.73
£5.68 inc VAT
Brand: TECO
Model: STD - 125x300
Delivery Time: In stock, 1-2 days
125x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significan..
£1.65
£1.98 inc VAT
Brand: TECO
Model: TCSS 63mm M10
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT
Brand: TECO
Model: LL - 38x450
Delivery Time: In stock, 1-2 days
38x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support. ..
£3.36
£4.03 inc VAT