75x225mm Welded Straddle Hanger 100ST
75x225mm Welded Straddle Hanger 100ST
Price: £12.54 (£15.05 inc VAT)
- Product Code: A1-5066
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WS75x225S100
- Weight: 2,000.00g
75x225mm Welded Straddle Hanger 100ST
Width: 75mm
Height: 225mm
Thickness: 2.4mm
Weight: 2000g
Straddle: 100mm
75mm x 225mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned directly opposite each other on either side of a wall or beam. Made from 2.4mm thick Galvanised steel EN 10346 DX51D Z275. Long term safe working load = 3.5 kN.
INSTALLATION of 75x225mm Welded Straddle Hanger 100ST
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard.
Masonry-Straddle-Hangers_data_sheet.pdf
Brand: TECO
Model: LD1000T100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1000mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFI..
£1.83
£2.20 inc VAT
Brand: TECO
Model: HWTNT100
Delivery Time: 2 - 3 Days
100mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONAll hangers come..
£4.94
£5.93 inc VAT
Brand: TECO
Model: TCDS 76mm M12
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mm76mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£1.06
£1.27 inc VAT
Brand: TECO
Model: TBCSK6x50
Delivery Time: In stock, 1-2 days
6x50 Countersunk Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mm Drill Dia: 6mm Hole Depth Embedment: 10mmMax Fixture Thickness: 20mm Clearance Hole..
£34.29
£41.15 inc VAT
Brand: TECO
Model: DWS100
Delivery Time: In stock, 1-2 days
4.8x100mm Drywall Screws are high quality screws designed for fixing plasterboard. Black phosphate finish. Features - 3.5mmBugle head Sharp point.InstallationScrew directly into timber, no pre drilling required. ..
£16.95
£20.34 inc VAT
Brand: TECO
Model: HD1500F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1500mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£4.48
£5.38 inc VAT