75x250mm Welded Straddle Hanger 100ST
75x250mm Welded Straddle Hanger 100ST
Price: £13.72 (£16.46 inc VAT)
- Product Code: A1-5078
- Delivery Time: 2 - 4 days
- Brand: TECO
- Model: WS75x250S100
- Weight: 2,800.00g
Welded Straddle Hanger 75mm x 250mm 100ST
Width: 75mm
Height: 250mm
Thickness: 2.4mm
Weight: 2800g
Straddle: 100mm
75mm x 250mm Masonry Straddle Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The Masonry Straddle hanger is two hangers joined together by a plate on the masonry flange to enable exact alignment of two joists positioned directly opposite each other on either side of a wall or beam. Made from 2.4mm thick Galvanised steel EN 10346 DX51D Z275. Long term safe working load = 3.5 kN.
INSTALLATION of 75x250mm Welded Straddle Hanger 100ST
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Use appropriate fixings.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard.
Masonry-Straddle-Hangers_data_sheet.pdf
Brand: TECO
Model: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.10
£1.32 inc VAT
Brand: TECO
Model: WSS4x30
Delivery Time: In stock, 1-2 days
4x30mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if require..
£21.60
£25.92 inc VAT
Brand: TECO
Model: US4x60
Delivery Time: In stock, 1-2 days
4x60mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£8.91
£10.69 inc VAT
Brand: TECO
Model: TCR
Delivery Time: In stock, 1-2 days
Trip-L-Grip Framing Anchor type CR is an universal anchor that can be used for stronger nailed joints and economical secondary connections in timber framing. Framing Anchors are an effective, versatile and economical method of providing strong, mechanical joints. Suitable for timber of minimum ..
£0.51
£0.61 inc VAT
Brand: TECO
Model: WT-275/250
Delivery Time: In stock, 1-2 days
275mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from up to 150mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirements..
£72.00
£86.40 inc VAT
Brand: TECO
Model: STUDBZPM12
Delivery Time: In stock, 1-2 days
M12 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with sta..
£2.40
£2.88 inc VAT