Menu
Menu
Your Cart
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm

8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Price: £7.20 (£8.64 inc VAT)
  • Product Code: A1-5572
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model and Size: EML8x2
  • Weight: 1,500.00g

8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm

Length: 2438mm
Width: 685mm
Weight: 1500g
Gauge: 0.4mm
Hole length: 20mm
Hole width: 10mm
 
8x2 Galvanised Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Galvanised Steel EN 10346 DX51D Z275.
 
                     
 
Hole width: 10mm                               Hole length: 20mm
Installation
  • Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways.
  • Timber Support - To connect to timber use plasterers nails & screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight.  
  • Metal Support - To fix steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a hairpin shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface.
  • To Solid Background - Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and a large diameter headed screw/nail that will keep the sheets firmly in place.
Note: Gloves should be worn as edges will be sharp.  Ensure that compatible corrosion resistant fixings are used; i.e. do not use galvanised fixings with stainless products. 
Brand: TECO Model and Size: CSHBZPM8x100
Delivery Time: In stock, 1-2 days
8mm - 100mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied comp..
£13.94
£16.73 inc VAT
Add to Cart
Brand: TECO Model and Size: TCDS 50mm M10
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.48
£0.58 inc VAT
Add to Cart
Brand: TECO Model and Size: LD600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centre..
£1.04
£1.25 inc VAT
Add to Cart
Brand: TECO Model and Size: HBH8/1000
Delivery Time: In stock, 1-2 days
8mm Helical Bar is used in a variety of applications; in general the metre lengths are used for crack stitching and reinforcing masonry in both new and existing masonry structures. The deformation of the fins makes the bonding characteristics of the Helical Bar far superior to alternative standard r..
£6.23
£7.48 inc VAT
Add to Cart
Brand: TECO Model and Size: MFM - 38x101
Delivery Time: In stock, 1-2 days
38mm x 101mm Multifunctional Mini Joist Hanger is a Face Fix Joist Hanger, produced from 1.2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19..
£1.73
£2.08 inc VAT
Add to Cart
Brand: TECO Model and Size: HD1200T150
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres h..
£3.39
£4.07 inc VAT
Add to Cart

Related Products

Brand: TECO Model and Size: NKG
Delivery Time: In stock, 1-2 days
30x3.75mm Galvanised Square Twist Nails are ideal for fixing Joist Hangers. The twisted shank gives greater pull out values than a standard round wire..
£4.50
£5.40 inc VAT
Add to Cart
Brand: TECO Model and Size: HFR135
Delivery Time: In stock, 1-2 days
135mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 70-95mm th..
£0.50
£0.60 inc VAT
Add to Cart
Model and Size: 65mm - Free Delivery
Delivery Time: In stock, 1-2 days
65mm Staifix Insofast Anchor is a robust one-piece metal fastener designed to securely attach drywall and insulated plasterboard panels to walls. This..
£227.87
£273.44 inc VAT
Add to Cart