63x170mm Multifunctional Joist Hanger
63x170mm Multifunctional Joist Hanger
Price: £2.60 (£3.12 inc VAT)
- Product Code: A1-5249
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT63/404BA - 63x170
- Weight: 501.00g
63x170mm Multifunctional Joist Hanger
Width: 63mm
Height: 170mm
Thickness: 2mm
Weight: 501g
63mm x 170mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 63x170mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: HB600
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB600 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requiremen..
£0.51
£0.61 inc VAT
Brand: TECO
Model: WM132x200
Delivery Time: 2 - 4 days
132mm x 200mm Welded Masonry Joist Hanger is designed to support 200mm high timber joist. The joist hanger's actual height is 190mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£9.31
£11.17 inc VAT
Brand: TECO
Model: FHMR47X125R150
Delivery Time: In stock, 1-2 days
The Masonry Return Joist Hangers are designed for similar applications and installation as the standard Masonry Joist Hangers. The return adds additional lateral support by wrapping around the back of the masonry or timber. They have a 25mm drop on the return flange as standard but many special..
£4.21
£5.05 inc VAT
Brand: TECO
Model: WSS4x20
Delivery Time: In stock, 1-2 days
4x20mm Stainless Steel Wood screws - ideal for fixing stainless steel brackets and stainless steel mesh products when used with a stainless steel 18mm diameter washer. Grade 1.4301 austenitic stainless steel to EN 10088-2. Screw directly into timber using a small pilot hole if required...
£43.20
£51.84 inc VAT
Brand: TECO
Model: GBCLIP150/50
Delivery Time: In stock, 1-2 days
150mm Galvanised Gravel Board Clips for fitting gravel boards securely to timber fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.48
£1.78 inc VAT
Brand: TECO
Model: RESINPS
Delivery Time: In stock, 1-2 days
300mm Polyester Resin is designed to aid and add strength to anchors or fixings, threaded studs, internal threaded sockets and rebar. Can be used in brickwork, concrete and most natural stone. Supplied with mixer nozzle. FeaturesStyrene free.Expansion free.Easy to dispense.Close spacing and edg..
£14.80
£17.76 inc VAT