Heavy Duty Restraint Strap 1000mm Bent 100mm
Heavy Duty Restraint Strap 1000mm Bent 100mm
Price: £2.83 (£3.40 inc VAT)
- Product Code: A1-5389
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HD1000B100
- Weight: 930.00g
Heavy Duty Restraint Strap 1000mm Bent 100mm
Length: 1000mm
Width: 28mm
Thickness: 4mm
Weight: 930g
Galvanised Heavy Duty Restraint Strap 1000mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
APPLICATION
For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Brand: TECO
Model: EB3x13
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model: LD3000F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 3m Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes...
£5.20
£6.24 inc VAT
Brand: TECO
Model: WSQPBZPM10
Delivery Time: In stock, 1-2 days
M10 Bright Zinc plated Square Plate Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. Thickness 3mm. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not u..
£17.50
£21.00 inc VAT
Brand: TECO
Model: WM44x150
Delivery Time: 2 - 4 days
44mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many ti..
£2.05
£2.46 inc VAT
Brand: TECO
Model: WB30x5
Delivery Time: In stock, 1-2 days
30x5 galvanised steel water bar for fitting into door sills for weather protection. Edge coated galvanised steel EN 10346 DX51D Z600. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind a..
£6.25
£7.50 inc VAT
Brand: TECO
Model: FC38
Delivery Time: In stock, 1-2 days
38mm Fencing Clip, a quick and easy way to secure fence panels and trellis to timber posts or plugged and screwed into masonry. Galvanised Steel EN 10346 DX51D Z275. ..
£0.39
£0.47 inc VAT