450mm Damp Proof Course - DPC
450mm Damp Proof Course - DPC
Price: £15.45 (£18.54 inc VAT)
- Product Code: A1-5642
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DPC450
- Weight: 5,020.00g
450mm Damp Proof Course - DPC
Length: 30000mm
Width: 450mm
Weight: 5020g
450mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.
Specification
- 500mu.
- Produced to BS 6515:84.
- Suitable for withstanding a compressive load of up to 2.5 N/mm2 as long as no lateral load is applied.
Installation
- Installation should be according to the code of practice CP102:1973 and normal DPC good practice procedures set in BS 5628 should be followed.
- For internal walls, DPC should be installed at the base of load bearing walls and linked with any adjoining DPM.
- The DPC should be at least the width the partition it is applied to and lapped by at least 100mm when two DPCs are joined and linked with any adjoining DPM.
Brand: TECO
Model: TDS200/10
Delivery Time: In stock, 1-2 days
200mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£10.91
£13.09 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£14.20
£17.04 inc VAT
Brand: TECO
Model: LL - 50x600
Delivery Time: In stock, 1-2 days
50mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The produc..
£4.03
£4.84 inc VAT
Brand: TECO
Model: HD1800F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1800mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£5.09
£6.11 inc VAT
Brand: TECO
Model: WM150x150
Delivery Time: 2 - 4 days
150mm x 150mm Welded Masonry Joist Hanger is designed to support 150mm high timber joist. The joist hanger's actual height is 140mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many t..
£8.33
£10.00 inc VAT
Brand: TECO
Model: MFT90/404BA - 90x157
Delivery Time: In stock, 1-2 days
90mm x 157mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It inclu..
£2.58
£3.10 inc VAT