8x75 Zinc Plated Coach Bolt - Box of 50
8x75 Zinc Plated Coach Bolt - Box of 50
Price: £10.06 (£12.07 inc VAT)
- Product Code: A1-5607
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: CSHBZPM8x75
- Weight: 1,600.00g
8x75 Zinc Plated Coach Bolt - Box of 50
Length: 75mm
Weight: 1600g
8mm - 75mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009
Features
- Supplied complete with a hexagon full nut to suit.
- Available in bright zinc plated.
- Galvanised and stainless steel to order.
Installation
- Always ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa.
Brand: TECO
Model: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.25
£3.90 inc VAT
Brand: TECO
Model: GTS - 38x300
Delivery Time: In stock, 1-2 days
38mm x 300mm Girder Truss Shoe is especially designed for supporting trussed rafters. The hanger is produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. The hanger includes a base tag which can significan..
£2.24
£2.69 inc VAT
Brand: TECO
Model: ERSG2.4
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used in sh..
£2.08
£2.50 inc VAT
Brand: TECO
Model: FHM47/150
Delivery Time: In stock, 1-2 days
47mm x 150mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£2.54
£3.05 inc VAT
Brand: TECO
Model: LD1200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£2.09
£2.51 inc VAT
Brand: TECO
Model: TCSS 38mm M12
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M 12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are ..
£0.33
£0.40 inc VAT