47mm x 225mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..

7mm Anker-it Yellow Plug is a standard red coloured plastic plug for 7mm hole diameter and 37mm in length.  FeaturesAnchor hole size - 7mmPlug length - 37mmMin. anchor hole length - 45mmWood screw size - 5mm to 6mm ..

450mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications.  Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..

Galvanised Light Duty Restraint Strap 250mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..

Galvanised Heavy Duty Restraint Strap 1200mm Bent 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..

Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..