Damp Proof Membrane - DPM - 4x25m Roll
Damp Proof Membrane - DPM - 4x25m Roll
Price: £69.00 (£82.80 inc VAT)
- Product Code: A1-5633
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: DPM300B
- Weight: 25,000.00g
Damp Proof Membrane - DPM - 4x25m Roll
Length: 25000mm
Width: 4000mm
Thickness: 0.3mm
Weight: 25000g
Damp Proof Membrane is intended for use within solid concrete floors to prevent the rise of moisture or damp through structure flooring. Suitable for most construction damp proofing requirements. The DPM can be used as either below the slab application, directly below the flooring surface or in a sandwich construction, between base concrete and the screed. Manufactured from recycled polythene to meet PIFA and BBA standards.
Specification
- Manufactured to both BBA and PIFA requirements.
- 1200 gauge (300 micron).
- 4m x 25m.
- High puncture resistance.
Installation
- Unless the application surface is smooth it should be blinded with compacted soft sand to guarantee a soft bed, free from any objects that may puncture the membrane during installation or when concrete is applied.
- It is recommended that the DPM should be covered with a protective layer or screed as soon as possible after the membrane has been installed.
- Care should be taken when applying concrete or screed on top of the DPM to avoid stretching or the DPM being displaced.
- When joining two sheets a minimum overlap of 150mm should be provided between each of the sheets.
- For the best waterproof protection when making a join a double welted fold should be formed between the joining sheets. This should be formed by an overlap of 300mm from both sheets. Alternatively the 150mm overlap can be sealed with 100mm wide jointing tape.
- Any Punctures in the membrane should be patched with sheets of identical thickness lapped at least 150mm away from the perforation edge and sealed with double sided pressure sensitive tape.
- When installed within structures Damp Proof Membrane should be linked to the Damp Proof Course within the structure walls to from a continuous damp proof barrier throughout the structure.
Note: Not recommended for use as a general gas proof barrier system on Brownfield sites or in applications where gases such as radon are present.
Brand: TECO
Model: WTGP-200/50
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£13.31
£15.97 inc VAT
Brand: TECO
Model: MFT47/404BA - 47x179
Delivery Time: In stock, 1-2 days
47mm x 179mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base l..
£2.60
£3.12 inc VAT
Brand: TECO
Model: HD1200B100T
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1200mm Bent 100mm Twisted 100mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offse..
£3.76
£4.51 inc VAT
Brand: TECO
Model: MFM - 100x70
Delivery Time: In stock, 1-2 days
Multifunctional Mini Joist Hanger 100 x 70mm is one of 1.6mm Face Fix Joist Hangers, available in five different sizes with a 86mm bearing. The hanger is produced from pre-galvanised mild steel thickness of only 1,6mm, all in accordance with the specification given in the BS EN 10327:2004 ..
£1.82
£2.18 inc VAT
Brand: TECO
Model: MFT90/404BA - 90x157
Delivery Time: In stock, 1-2 days
90mm x 157mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It inclu..
£2.60
£3.12 inc VAT
Brand: TECO
Model: TCDS 50mm M10
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M10 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.50
£0.60 inc VAT