200mm Stainless Steel General Purpose Wall Tie - pack of 50
200mm Stainless Steel General Purpose Wall Tie - pack of 50
Price: £13.86 (£16.63 inc VAT)
- Product Code: A1-5495
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: WTGP-200/50
- Weight: 850.00g
200mm Stainless Steel General Purpose Wall Tie - pack of 50
Length: 200mm
Weight: 850g
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.
Specification
- Fully tested to BS EN846-5:2000
- Meets the requirements of BS EN 845-1:2003.
- Housing Ties meet the requirements of Part E of the Building Regulations for Type A in party walls of any height, which states that a masonry cavity wall tie can only be used if the measured dynamic stiffness is less than 4.8MN/m.
Features
- Tangle free - saves time and money. Supplied in bundles - practical benefits for the bricklayer.
- Safety on site.
- Better storage particularly during inclement weather.
- Unique crossed and closed end prevents entanglement.
Brand: TECO
Model: HFR165
Delivery Time: In stock, 1-2 days
165mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 96-126mm thick panels. Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent b..
£0.58
£0.70 inc VAT
Brand: TECO
Model: LD220F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 220mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model: PB13/19
Delivery Time: In stock, 1-2 days
Plaster depth 13-19mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impac..
£4.18
£5.02 inc VAT
Brand: TECO
Model: LL - 100x450
Delivery Time: In stock, 1-2 days
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£4.76
£5.71 inc VAT
Brand: TECO
Model: WM125x225
Delivery Time: 2 - 4 days
125mm x 225mm Welded Masonry Joist Hanger is designed to support 225mm high timber joist. The joist hanger's actual height is 215mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£5.33
£6.40 inc VAT
Brand: TECO
Model: MMG3
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a be..
£1.55
£1.86 inc VAT