38x183mm Multifunctional Joist Hanger
38x183mm Multifunctional Joist Hanger
Price: £2.68 (£3.22 inc VAT)
- Product Code: A1-5251
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: MFT38/404BA 38x183
- Weight: 501.00g
38x183mm Multifunctional Joist Hanger
Width: 38mm
Height: 183mm
Thickness: 2mm
Weight: 501g
38mm x 183mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 8.25 kN.
FIXING INSTRUCTIONS for 38x183mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model and Size: EB3x10
Delivery Time: In stock, 1-2 days
10mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model and Size: HD1500T150
Delivery Time: In stock, 1-2 days
Galvanised Heavyt Duty Restraint Strap 1500mm Twisted 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset cen..
£4.24
£5.09 inc VAT
Brand: TECO
Model and Size: ST150
Delivery Time: In stock, 1-2 days
Mild Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Zinc and yellow passivated mild steel. Threaded one end. Screw directly into timber using a small pilot hole if required. - 5mm..
£35.00
£42.00 inc VAT
Brand: TECO
Model and Size: LL - 100x450
Delivery Time: In stock, 1-2 days
100x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support...
£4.76
£5.71 inc VAT
Brand: TECO
Model and Size: TCSS 38mm M10
Delivery Time: In stock, 1-2 days
Diameter: 38mmTeeth Size: 0.9mm38mm M10 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.26
£0.31 inc VAT
Brand: TECO
Model and Size: WB30x2.5
Delivery Time: In stock, 1-2 days
30x2.5 galvanised steel water bar for fitting into door sills for weather protection. Galvanised steel EN 10346 DX51D Z275. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind and rain from en..
£3.25
£3.90 inc VAT