275mm Stainless Steel Housing Tie - pack of 250
275mm Stainless Steel Housing Tie - pack of 250
Price: £73.68 (£88.42 inc VAT)
- Product Code: A1-5492
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model and Size: WT-275/250
- Weight: 3,000.00g
275mm Stainless Steel Housing Tie - pack of 250
Length: 275mm
Weight: 3000g
275mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from up to 150mm. Stainless Steel.
Specification
- Fully tested to BS EN846-5:2000
- Meets the requirements of BS EN 845-1:2003.
- Housing Ties meet the requirements of Part E of the Building Regulations for Type A in party walls of any height, which states that a masonry cavity wall tie can only be used if the measured dynamic stiffness is less than 4.8MN/m.
Features
- Tangle free - saves time and money. Supplied in bundles - practical benefits for the bricklayer.
- Safety on site.
- Better storage particularly during inclement weather.
- Unique crossed and closed end prevents entanglement.
Brand: TECO
Model and Size: PB13/19
Delivery Time: In stock, 1-2 days
Plaster depth 13-19mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impac..
£4.18
£5.02 inc VAT
Brand: TECO
Model and Size: LD1200B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1200mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset cent..
£2.09
£2.51 inc VAT
Brand: TECO
Model and Size: HM900
Delivery Time: In stock, 1-2 days
Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..
£52.73
£63.28 inc VAT
Brand: TECO
Model and Size: TSR102C
Delivery Time: In stock, 1-2 days
Usage: to cut precision grooves or recesses (daps) for Split Ring and Shear Plate Connectors.A spare set. ..
£390.50
£468.60 inc VAT
Brand: TECO
Model and Size: TCSS 63mm M16
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT
Brand: TECO
Model and Size: WM125x175
Delivery Time: 2 - 4 days
125mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£4.73
£5.68 inc VAT