200mm Stainless Steel General Purpose Wall Tie - pack of 250
200mm Stainless Steel General Purpose Wall Tie - pack of 250
Price: £67.31 (£80.77 inc VAT)
- Product Code: A1-5496
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: WTGP-200/250
- Weight: 4,250.00g
200mm Stainless Steel General Purpose Wall Tie - pack of 250
Length: 200mm
Weight: 4250g
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.
Specification
- Fully tested to BS EN846-5:2000
- Meets the requirements of BS EN 845-1:2003.
- Housing Ties meet the requirements of Part E of the Building Regulations for Type A in party walls of any height, which states that a masonry cavity wall tie can only be used if the measured dynamic stiffness is less than 4.8MN/m.
Features
- Tangle free - saves time and money. Supplied in bundles - practical benefits for the bricklayer.
- Safety on site.
- Better storage particularly during inclement weather.
- Unique crossed and closed end prevents entanglement.
Brand: TECO
Model: US4x40
Delivery Time: In stock, 1-2 days
4x40mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£6.46
£7.75 inc VAT
Brand: TECO
Model: WNT - 90x285
Delivery Time: In stock, 1-2 days
90mm x 285mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.60
£0.72 inc VAT
Brand: TECO
Model: RESINPS
Delivery Time: In stock, 1-2 days
300mm Polyester Resin is designed to aid and add strength to anchors or fixings, threaded studs, internal threaded sockets and rebar. Can be used in brickwork, concrete and most natural stone. Supplied with mixer nozzle. FeaturesStyrene free.Expansion free.Easy to dispense.Close spacing and edg..
£14.80
£17.76 inc VAT
Brand: TECO
Model: SRTCSS 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Stainless Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring is..
£20.73
£24.88 inc VAT
Brand: TECO
Model: FHMR47X150R150
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£3.85
£4.62 inc VAT
Brand: TECO
Model: WM63x250
Delivery Time: 2 - 4 days
63mm x 250mm Welded Masonry Joist Hanger is designed to support 250mm high timber joist. The joist hanger's actual height is 240mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£5.50
£6.60 inc VAT