175x150mm Heavy Duty Face Fix Joist Hanger
175x150mm Heavy Duty Face Fix Joist Hanger
Price: £10.69 (£12.83 inc VAT)
- Product Code: A1-5196
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model: HWTNT175
- Weight: 1.03g
175x150mm Heavy Duty Face Fix Joist Hanger
Width: 175mm
Height: 150mm
Thickness: 2.5mm
Weight: 1.03g
175mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 175x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: HB450
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB450 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requiremen..
£0.48
£0.58 inc VAT
Brand: TECO
Model: WSTDGM20
Delivery Time: In stock, 1-2 days
Diameter: 37mm M20 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£4.50
£5.40 inc VAT
Brand: TECO
Model: CSHBZPM8x100
Delivery Time: In stock, 1-2 days
8mm - 100mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied comp..
£13.94
£16.73 inc VAT
Brand: TECO
Model: SRTCG 102mm
Delivery Time: In stock, 1-2 days
Diameter: 102mm102mm Galvanised Steel Split Ring Timber Connector is designed for heavy shear loads in timber to timber connections.The Split Ring with the bevelled inside and outside face makes it easier to insert in the pre-cut grooves and also gives greater load capacity.The Ring i..
£7.53
£9.04 inc VAT
Brand: TECO
Model: CSHBZPM6x75
Delivery Time: In stock, 1-2 days
6mm - 75mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied compl..
£20.04
£24.05 inc VAT
Brand: TECO
Model: DS8x2
Delivery Time: In stock, 1-2 days
Exterior Wood Screw with a green organic coating for a longer life. Ideal for decking and all outdoor applications. FeaturesDiameter - 4mmHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber using a small pi..
£21.06
£25.27 inc VAT