50x150mm Heavy Duty Face Fix Joist Hanger
50x150mm Heavy Duty Face Fix Joist Hanger
Price: £4.53 (£5.44 inc VAT)
- Product Code: A1-5188
- Delivery Time: 2 - 3 Days
- Brand: TECO
- Model: HWTNT50
- Weight: 757.00g
50x150mm Heavy Duty Face Fix Joist Hanger
Width: 50mm
Height: 150mm
Thickness: 2mm
Weight: 757g
50mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275.
SPECIFICATION
- All hangers come up to 150mm deep
- M10 & M12 bolt holes for added versatility
- 95mm bearing
- Nominal depth 150mm
- Available in standard or with concealed flanges
- Available also in stainless steel.
FIXING INSTRUCTIONS for 50x150mm Heavy Duty Face Fix Joist Hanger
- In order of avoiding rotation, the hanger should exceed the half of the supported member depth.
- Can be fully nailed, coach screwed and bolted.
- 3no. M10 x 75mm Coach Screws on either side and the supported joist bolted through the hanger using an M12 Bolt
- The safe working load also depends on the block strength and used fixings.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: SBG3
Delivery Time: In stock, 1-2 days
Galvanised Skim Angle Bead is for use on plasterboard or aerated blocks. Designed for standard single coat plasterwork for internal thin-coat plaster application, used to reinforce and protect plaster on corners and reveals at its weakest points.Specification Galvanised steel EN 10346 DX51..
£1.80
£2.16 inc VAT
Brand: TECO
Model: DPC300
Delivery Time: In stock, 1-2 days
300mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..
£10.16
£12.19 inc VAT
Brand: TECO
Model: TDS150/50
Delivery Time: In stock, 1-2 days
150mm Timber Drive Screw is a heavy duty fixing that requires no pre-drilling. Suitable for many timber to timber applications. FeaturesHeat treated shank for extra strength.Green organic coating.Each pack comes complete with driver.InstallationScrew directly into timber, no pre dril..
£35.11
£42.13 inc VAT
Brand: TECO
Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.10
£9.72 inc VAT
Brand: TECO
Model: TCSS 50mm M12
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mm50mm M12 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.30
£0.36 inc VAT
Brand: TECO
Model: LD1100F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1100mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£2.02
£2.42 inc VAT