Heavy Duty Restraint Strap 900mm Bent 150mm
Heavy Duty Restraint Strap 900mm Bent 150mm
Length: 900mm
Width: 28mm
Thickness: 4mm
Weight: 837g
Galvanised Heavyt Duty Restraint Strap 900mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
APPLICATION
For galvanised straps use min 7 no. 3.75 x 30 square twist nails or equivalent fixed to timber joists / rafters.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Brand: TECO
Model: LD600B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 600mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset ..
£1.04
£1.25 inc VAT
Brand: TECO
Model: TCSS 63mm M16
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.73
£0.88 inc VAT
Brand: TECO
Model: SVM
Delivery Time: In stock, 1-2 days
75mm Stainless Steel Soffit Vent Mesh is for use in new build properties. It is used over vents in soffits to allow air flow to prevent condensation but prevents access to birds and insects. Made from Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gloves should be worn as edges may be sharp...
£78.51
£94.21 inc VAT
Brand: TECO
Model: FHMR47X200R140
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.19
£5.03 inc VAT
Brand: TECO
Model: WSTDGM24
Delivery Time: In stock, 1-2 days
Diameter: 44mm M24 Standard Round Washers are made from heavy duty hot dipped spun galvanised steel. Suitable for a variety of applications where a heavy washer is required. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galv..
£8.50
£10.20 inc VAT
Brand: TECO
Model: HFR135
Delivery Time: In stock, 1-2 days
135mm Helical Flat Roof Fixing is a hammer driven fixing for securing composite panels to wooden battens. Bright zinc plated. For 70-95mm thick panels. Features8mm diameter. Large 20mm head.Quick installation - no drilling, no need for screws. Unique one piece to prevent bending ..
£0.50
£0.60 inc VAT