300mm Hip Iron - 4mm thick
300mm Hip Iron - 4mm thick
Price: £2.60 (£3.12 inc VAT)
- Product Code: A1-5595
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HI300/4
- Weight: 410.00g
300mm Hip Iron - 4mm thick
Length: 300mm
Thickness: 4mm
Weight: 410g
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes.
Installation
- Due to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so that they cannot slip down.
Brand: TECO
Model: EB3x13
Delivery Time: In stock, 1-2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape.Specification Galvanised steel EN 10346 DX51D Z275..Installation Use appropriate fixings..
£2.93
£3.52 inc VAT
Brand: TECO
Model: LD1100F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1100mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£1.91
£2.29 inc VAT
Brand: TECO
Model: US4x50
Delivery Time: In stock, 1-2 days
4x50mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£7.19
£8.63 inc VAT
Brand: TECO
Model: MT200
Delivery Time: In stock, 1-2 days
200mm Movement Ties are designed to provide restraint in one direction and movement to allow for horizontal expansion and contraction. The Debonding Sleeve is located over the embedment detail to allow the tie to move. Typical usages are in areas where masonry is restrained to Steelwork columns and ..
£13.00
£15.60 inc VAT
Brand: TECO
Model: WM75x100
Delivery Time: 2 - 4 days
75mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timb..
£4.20
£5.04 inc VAT
Brand: TECO
Model: DPC112
Delivery Time: In stock, 1-2 days
112mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu.Produced to BS 6515:84.Suitable for withstanding a compress..
£3.39
£4.07 inc VAT