44x151mm Multifunctional Joist Hanger
44x151mm Multifunctional Joist Hanger
Price: £2.25 (£2.70 inc VAT)
- Product Code: A1-5252
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MFT44/346BA - 44x151
- Weight: 429.00g
44x151mm Multifunctional Joist Hanger
Width: 44mm
Height: 151mm
Thickness: 2mm
Weight: 429g
44mm x 151mm Multifunctional Joist Hanger is a Face Fix Joist Hanger, produced from 2mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is especially designed for timber to masonry and timber to timber fixings. It includes base location tabs and a corresponding hole pattern of 2 x M12 bolt holes, 19 x nail or screws. It can bolted, screwed, coach screwed or nailed. Long term safe working load = 5.3 kN.
FIXING INSTRUCTIONS for 44x151mm Multifunctional Joist Hanger
- It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
- The hanger should be a minimum of over half (60%) the depth of the supported member to avoid rotation.
SPECIFICATION
- Location tabs aid fast accurate alignment of the hanger.
- M12 bolt holes.
- 85mm bearing.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Face-Fix-Hangers_data_sheet.pdf
Brand: TECO
Model: MMG3
Delivery Time: In stock, 1-2 days
Galvanised Mini Mesh Beads are for internal thin-coat plaster applications. Mini Mesh Bead is used to reinforce and protect one-coat finish or plaster or corners at its weakest point on internal walls and plasterboard. The Mini Mesh bead had a greater area of expanded metal therefore gives a be..
£1.55
£1.86 inc VAT
Brand: TECO
Model: NP85x350
Delivery Time: In stock, 1-2 days
85x350mm versatile plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings. Always e..
£82.50
£99.00 inc VAT
Brand: TECO
Model: LD200F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT
Brand: TECO
Model: TAPEDW75
Delivery Time: In stock, 1-2 days
75mm wide professional internal plastering joint tapes. Open weave self-adhesive plasterers scrim tape is used for reinforcing joints and patching repairs on plasterboard. InstallationTapered drywall joints have special edges that provide a pocket for joint compound and tape.Mix the setti..
£6.36
£7.63 inc VAT
Brand: TECO
Model: WTGP-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£67.31
£80.77 inc VAT
Brand: TECO
Model: STD - 132x300
Delivery Time: In stock, 1-2 days
132x300mm Woody Standard Joist Hanger is a timber to timber joist hanger produced from 1mm thick pre-galvanised mild steel in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. It is also available in stainless steel. The hanger includes a base tag, which can significan..
£1.65
£1.98 inc VAT