Light Duty Restraint Strap 1000mm Bent 100mm Twisted 100mm
Light Duty Restraint Strap 1000mm Bent 100mm Twisted 100mm
Price: £2.04 (£2.45 inc VAT)
- Product Code: A1-5353
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LD1000B100T
- Weight: 508.00g
Light Duty Restraint Strap 1000mm Bent 100mm Twisted 100mm
Length: 1000mm
Width: 28mm
Thickness: 2.4mm
Weight: 508g
Galvanised Light Duty Restraint Strap 1000mm Bent 100mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry and also for horizontal restraint. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.
SPECIFICATION
The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.
Restraint-Straps.pdf
Brand: TECO
Model: CSHBZPM8x150
Delivery Time: In stock, 1-2 days
8mm - 150mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied comp..
£9.91
£11.89 inc VAT
Brand: TECO
Model: GB490
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is located on ..
£55.76
£66.91 inc VAT
Brand: TECO
Model: US4x40
Delivery Time: In stock, 1-2 days
4x40mm Ultimate Wood Screws - tempered and waxed high quality zinc plated steel, self-centering, self-countersinking, stick fit wood screws with slotted shank for reduced wood splitting and a sharp point for rapid starting with minimum force.CharacteristicsTempered and waxed high quality zinc p..
£6.46
£7.75 inc VAT
Brand: TECO
Model: NPSTD85x175
Delivery Time: In stock, 1-2 days
85x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropriate fixings..
£33.60
£40.32 inc VAT
Brand: TECO
Model: STUDBZPM6
Delivery Time: In stock, 1-2 days
M6 Bright Zinc Plated Studding ( threaded bar), suitable for many applications. Supplied as standard in mild steel, high tensile available to order. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stai..
£1.66
£1.99 inc VAT
Brand: TECO
Model: WM125x175
Delivery Time: 2 - 4 days
125mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber..
£4.99
£5.99 inc VAT