47x67mm Mini Mini Joist Hanger
47x67mm Mini Mini Joist Hanger
Price: £0.53 (£0.64 inc VAT)
- Product Code: A1-5232
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: MMINI - 47x67
- Weight: 96.00g
47x67mm Mini Mini Joist Hanger
47x67mm Mini Mini Joist Hanger is a timber to timber joist hanger suitable for light duty applications such as trimmers, ceiling joists and decking. The hanger is produced from 1mm thick pre-galvanised mild steel. The tag on the base of the hanger helps avoid rotation and aids fast, accurate locationing. This tag can easily be bent. The joist bearing is 50mm. Long term safe working load = 3.47 kN.
FIXING INSTRUCTIONS for 47x67mm Mini Mini Joist Hanger
All holes should be nailed using 30 x 3.75 Square Twist Nails or equivalent
SPECIFICATION
- Galvanised Steel EN 10346 DX51D Z275,
- Test by CERAM Research Ltd Notification Body No. 1289.
Mini-Joist-Hangers_data_sheet.pdf
Brand: TECO
Model: ERSG3
Delivery Time: In stock, 1-2 days
Galvanised External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£2.53
£3.04 inc VAT
Brand: TECO
Model: FHMR47X150R215
Delivery Time: In stock, 1-2 days
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variatio..
£4.00
£4.80 inc VAT
Brand: TECO
Model: FFCPG150
Delivery Time: In stock, 1-2 days
100mm Galvanised Fishtailed Frame Cramp is traditionally used for fixing wooden door and window frames into block work. Frame Cramps can also be used for restraining masonry to new and existing structures in non-structural applications and can easily be shot fired into steel work. Available in galva..
£0.34
£0.41 inc VAT
Brand: TECO
Model: WM44x100
Delivery Time: 2 - 4 days
44mm x 100mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or..
£1.90
£2.28 inc VAT
Brand: TECO
Model: PBPS15/17
Delivery Time: In stock, 1-2 days
Plaster depth 15-17mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.56
£4.27 inc VAT
Brand: TECO
Model: LD300F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 300mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres hol..
£0.53
£0.64 inc VAT