Stainless Steel Hand Rail Bracket Kit
Stainless Steel Hand Rail Bracket Kit
Price: £8.66 (£10.39 inc VAT)
- Product Code: A1-5811
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: HHR
Brand: TECO
Model: GB490
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast..
£55.76
£66.91 inc VAT
Brand: TECO
Model: NUTFBZPM20
Delivery Time: In stock, 1-2 days
M20 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£19.31
£23.17 inc VAT
Brand: TECO
Model: SFT130
Delivery Time: In stock, 1-2 days
Stainless Steel Screw Ties are used to tie timber door and window frames to adjacent brickwork. Grade 1.4301 austenitic stainless steel to EN 10088-2. Threaded one end. Screw directly into timber using a small pilot hole if required. - 3mm..
£108.58
£130.30 inc VAT
Brand: TECO
Model: WM100x300
Delivery Time: 2 - 4 days
100mm x 300mm Welded Masonry Joist Hanger is designed to support 300mm high timber joist. The joist hanger's actual height is 290mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to t..
£12.24
£14.69 inc VAT
Brand: TECO
Model: NP170x175
Delivery Time: In stock, 1-2 days
170x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£82.50
£99.00 inc VAT
Brand: TECO
Model: LL - 63x450
Delivery Time: In stock, 1-2 days
63x450mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. This timber to timber joist hanger designed for use in Loft Conversions where the hanger extends below the support.&..
£4.06
£4.87 inc VAT