Menu
Menu
Your Cart
Cart0 item(s) - £0.00 0

  • Your shopping cart is empty!

Call Back
Contact
Joist Hangers
Joist Hangers
stainless steel and galvanised metal lath sheets
restraint straps and bands

Light Duty Restraint Strap 1100mm Flat

Light Duty Restraint Strap 1100mm Flat
Rate this product
Light Duty Restraint Strap 1100mm Flat
Price: £2.02 (£2.42 inc VAT)
  • Product Code: A1-5357
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD1100F
  • Weight: 559.00g
Show other lengths

Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Light Duty Restraint Strap 1100mm Flat

Length: 1100mm
Width: 28mm
Thickness: 2.4mm
Weight: 559g

Galvanised Light Duty Restraint Strap 1100mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

63mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 63mm M16
Delivery Time: In stock, 1-2 days
63mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Diameter: 63mmTeeth Size: 1.2mm63mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are p..
£0.76
£0.91 inc VAT
47mm Woody Truss Clip
Brand: TECO Model: TCW47
Delivery Time: In stock, 1-2 days
47mm Woody Truss Clip
47mm Woody Truss Clips are used to fix trusses, girders and rafters to the wall plate. Installation prongs on the truss clip to aid location. These truss clips can withstand superior design loads. Made from galvanised steel EN 10346 DX51D Z275. Tested by CERAM Research Ltd. Long term safe ..
£0.33
£0.40 inc VAT
175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
Brand: TECO Model: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete - 50mm width
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to  concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275.  ..
£1.70
£2.04 inc VAT
6x75 Thunderbolt Flange Head - box of 100
Brand: TECO Model: TBFlange6x75
Delivery Time: In stock, 1-2 days
6x75 Thunderbolt Flange Head - box of 100
6x75 Flange Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (F..
£37.90
£45.48 inc VAT
225mm Stainless Steel Housing Tie - pack of 250
Brand: TECO Model: WT-225/250
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Housing Tie - pack of 250
225mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£36.00
£43.20 inc VAT
Heavy Duty Restraint Strap 800mm Bent 150mm
Brand: TECO Model: HD800B150
Delivery Time: In stock, 1-2 days
Heavy Duty Restraint Strap 800mm Bent 150mm
Galvanised Heavyt Duty Restraint Strap 800mm Bent 150mm is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.APP..
£2.39
£2.87 inc VAT

Rate this product

Please login or register to review