Light Duty Restraint Strap 1200mm Flat

Light Duty Restraint Strap 1200mm Flat
Rate this product
Light Duty Restraint Strap 1200mm Flat
Price: £2.20 (£2.64 inc VAT)
  • Product Code: A1-5360
  • Delivery Time: In stock, 1-2 days
  • Brand: TECO
  • Model: LD1200F
  • Weight: 610.00g
Need custom bends or twists?

Fill below and send for a quote.

Strap #1

/
Total length of the strap
mm
Length to
/
mm
angle
degrees
Add another bend/twist
Quantity
Add next custom strap

Galvanised Light Duty Restraint Strap 1200mm Flat

Length: 1200mm
Width: 28mm
Thickness: 2.4mm
Weight: 610g

Galvanised Light Duty Restraint Strap 1200mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.

SPECIFICATION

The straps are manufactured in accordance with the BS 5268 Part 3 of the Building Regulations.

Please note: 1-3 metre lengths come from a coil rather than a solid rigid bar. The physical characteristics of the metal mean that after a certain length they can bend rather than being flat rigid. It is not a question of any fault but rather the ‘nature of the beast’. The phrase: “straps are flat” is not misleading! It means they are not bent or twisted; at no point is there any claim that they are straight and true. Strap material is edge-coat galvanised which is required by the standard. This process, and the fact that the material is a coil does cause deflection, and the longer the length the more it is apparent.

125x175mm Welded Masonry Joist Hanger
Brand: TECO Model: WM125x175
Delivery Time: 2 - 4 days
125x175mm Welded Masonry Joist Hanger
125mm x 175mm Welded Masonry Joist Hanger is designed to support 175mm high timber joist. The joist hanger's actual height is 165mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber..
£4.99
£5.99 inc VAT
63mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Brand: TECO Model: TCSS 63mm M16
Delivery Time: In stock, 1-2 days
63mm M16mm Galvanised Steel Single Sided Tooth Plate Timber Connector
Diameter: 63mmTeeth Size: 1.2mm63mm M16 Single Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.76
£0.91 inc VAT
47x150mm Single Piece Masonry Hanger
Brand: TECO Model: FHM47/150
Delivery Time: In stock, 1-2 days
47x150mm Single Piece Masonry Hanger
47mm x 150mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using appropr..
£2.20
£2.64 inc VAT
30x5 Galvanised Steel Water Bar - 1m
Brand: TECO Model: WB30x5
Delivery Time: In stock, 1-2 days
30x5 Galvanised Steel Water Bar - 1m
30x5 galvanised steel water bar for fitting into door sills for weather protection. Edge coated galvanised steel EN 10346 DX51D Z600. Traditionally used with wooden doors, the water bar is fitted into the threshold so that the front door closes against it, sealing any gaps and preventing wind a..
£6.93
£8.32 inc VAT
Light Duty Restraint Strap 750mm Twisted 100mm
Brand: TECO Model: LD750T100
Delivery Time: In stock, 1-2 days
Light Duty Restraint Strap 750mm Twisted 100mm
Galvanised Light Duty Restraint Strap 750mm Twisted 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.SPECIFIC..
£1.37
£1.64 inc VAT
225mm Stainless Steel Coiled Mesh Lath - 20m length 225mm Stainless Steel Coiled Mesh Lath - 20m length
Brand: TECO Model: EMLS225
Delivery Time: In stock, 1-2 days
225mm Stainless Steel Coiled Mesh Lath - 20m length
225mm Stainless Steel Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths together.Gloves should be..
£68.77
£82.52 inc VAT