47x100mm - R100mm Masonry Return Hanger
47x100mm - R100mm Masonry Return Hanger
Price: £3.06 (£3.67 inc VAT)
- Product Code: A1-5716
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: FHMR47X100R100
- Weight: 402.00g
47x100mm - R100mm Masonry Return Hanger
Width: 47mm
Height: 100mm
Thickness: 2.4mm
Weight: 402g
Masonry Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard. Any variations can be made to order. Long term safe working load = 5.4 kN.
Features
- Pre-galvanized steel, 2.4mm thick,
- Galvanised steel EN 10346 DX51D Z600.
- Manufactured to EN 845-1:2013.
- Tested by CERAM Research Ltd.
Installation of 47x100mm - R100mm Masonry Return Hanger
- The back plate of the hanger should lie flat against the vertical masonry support.
- Masonry flange should have a minimum of 3 courses (675mm masonry) above.
- Both supporting and above masonry should be allowed to mature before any load is applied.
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm.
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent.
- To provide lateral restraint heavy duty straps should be used.
- The masonry flange should always be securely fixed or adequately embedded and should never be placed in dry slots.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
- Use correct strength mortar as per British Standard
Masonry-Return-Hangers_data_sheet.pdf
Brand: TECO
Model: TBCSK6x50
Delivery Time: In stock, 1-2 days
6x50 Countersunk Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mm Drill Dia: 6mm Hole Depth Embedment: 10mmMax Fixture Thickness: 20mm Clearance Hole..
£34.29
£41.15 inc VAT
Brand: TECO
Model: HWTNT200
Delivery Time: 2 - 3 Days
200mm x 150mm Heavy Duty Face Fix Joist Hanger is especially designed for timber to timber, concrete or masonry fixings. The hanger is produced from 2.5mm thick pre-galvanised mild steel and in accordance with the specification given in the BS EN 10327:2004 DX51D+Z275. SPECIFICATIONA..
£10.81
£12.97 inc VAT
Brand: TECO
Model: ARRM
Delivery Time: In stock, 1-2 days
1m x 50m Alkaline Resistant Render Mesh reinforcing mesh which is made from woven fibre-glass yarns and coated with an alkaline resistant latex. This coating prevents the alkaline present in cements from degrading the glass fibre, resulting in reduced strength. The mesh is ideal for use in cons..
£56.14
£67.37 inc VAT
Brand: TECO
Model: WTGP-225/50
Delivery Time: In stock, 1-2 days
225mm Stainless Steel General Purpose Wall Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:20..
£14.20
£17.04 inc VAT
Brand: TECO
Model: EMLG305
Delivery Time: In stock, 1-2 days
305mm Galvanised Coiled Mesh Lath is produced for brick and block work reinforcement. Primarily usage is to prevent cracking. SpecificationGalvanised steel EN 10346 DX51D Z275,Available in 20 metre coilsInstallation Overlap by a minimum of 75mm when joining two lengths toget..
£39.96
£47.95 inc VAT
Brand: TECO
Model: CSHBZPM10x240
Delivery Time: In stock, 1-2 days
10mm - 240mm length Zinc Plated Coach Bolt. Cup Square Hex Bolts are also referred to as Coach Bolts or Carriage Bolts. They have a dome head with a square underneath for locking into the timber. Bright zinc plated or hot dipped spun galvanised to EN ISO 1461:2009 FeaturesSupplied com..
£24.85
£29.82 inc VAT