5x60mm Ultimate Wood Screws - box of 200
5x60mm Ultimate Wood Screws - box of 200
Price: £11.76 (£14.11 inc VAT)
- Product Code: A1-5824
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: US5x60
Brand: TECO
Model: GBCLIP175/50
Delivery Time: In stock, 1-2 days
175mm Galvanised Gravel Board Clip with lip for concrete for fitting gravel boards securely to concrete fence posts. Width 55mm. Made from Galvanised Steel EN 10346 DX51D Z275. ..
£1.70
£2.04 inc VAT
Brand: TECO
Model: PBPS6/8
Delivery Time: In stock, 1-2 days
Plaster depth 6-8mm uPVC Plaster Stop Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resist..
£3.08
£3.70 inc VAT
Brand: TECO
Model: NUTFBZPM8
Delivery Time: In stock, 1-2 days
M8 Zinc Plated Hex Full Nuts for use with bolts and studding. InstallationAlways ensure that compatible corrosion resistant nuts & washers are used, i.e. do not use galvanised nuts & washers with stainless steel studding or vice versa...
£6.86
£8.23 inc VAT
Brand: TECO
Model: HM900
Delivery Time: In stock, 1-2 days
Galvanised Hex mesh Netting is used for floor screed reinforcement, wall plaster reinforcement and roof insulation. Also can be used for fencing. Made from hot dipped galvanised steel prior to weaving. Gloves should be worn as edges will be sharp.Hex mesh is formed by twisting two adjacent wires at ..
£52.73
£63.28 inc VAT
Brand: TECO
Model: WM75x275
Delivery Time: 2 - 4 days
75mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to ti..
£6.18
£7.42 inc VAT
Brand: TECO
Model: HB600
Delivery Time: In stock, 1-2 days
Herringbone Joist Strut HB600 provides the means to prevent sideways movement or the buckling of joists, a simple alternative to the labour intensive traditional timber noggins. Made from galvanised steel EN 10346 DX51D Z275. Joint centres - 400mm, Strut length - 480mm. Meets bracing requiremen..
£0.50
£0.60 inc VAT