uPVC Angle Bead - Plaster Depth 2-3mm
uPVC Angle Bead 2-3mm
Length: 2500mm
Weight: 280g
Plaster depth 2-3mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact resistant dry lining and wet plaster beads for internal or external use. uPVC Bead is supplied as standard in white, although many colours are available upon request by supplying us with the relevant RAL reference code.

Characteristics
- Plaster depth 2 to 3mm
- Simple installation (with plaster dabs or stainless steel fixings),
- No sharp edges, and safe to handle,
- Easy to cut,
- Non corrosive.
Brand: TECO
Model: HI300/3
Delivery Time: In stock, 1-2 days
Scrolled Hot Dipped Galvanised Hip Irons provide a decorative restraint when bedding hip tiles. Available in a range of sizes and finishes. InstallationDue to the angle of the roof along the hip, a Hip Iron is fixed at the bottom of the hip first to support the weight of the hip tiles so that they ..
£3.28
£3.94 inc VAT
Brand: TECO
Model: TCSS 50mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 50mmTeeth Size: 0.9mmSingle Sided Stainless Steel Tooth Plate Timber Connector 50mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. ..
£3.12
£3.74 inc VAT
Brand: TECO
Model: HD1300F
Delivery Time: In stock, 1-2 days
Galvanised Heavy Duty Restraint Strap 1300mm Flat is designed for lateral and horizontal restraint (as in roof trusses). The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres holes.INSTALLAT..
£3.88
£4.66 inc VAT
Brand: TECO
Model: WM90x275
Delivery Time: 2 - 4 days
90mm x 275mm Welded Masonry Joist Hanger is designed to support 275mm high timber joist. The joist hanger's actual height is 265mm, and the flange is built into brick or block wall. It has a minimum crushing strength of 3.5N/mm. Welded Masonry Joist Hanger is also suitable for many timber to timber ..
£9.90
£11.88 inc VAT
Brand: TECO
Model: LD1600F
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 1600mm Flat is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centres ho..
£2.93
£3.52 inc VAT
Brand: TECO
Model: TCDS 63mm M12
Delivery Time: In stock, 1-2 days
Diameter: 63mmTeeth Size: 1.2mm63mm M12 Double Sided Tooth Plate Timber Connector is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity. The connectors are produced from pre-gal..
£0.40
£0.48 inc VAT
