50x250mm Welded Masonry Joist Hanger
50x250mm Welded Masonry Joist Hanger
Price: £4.51 (£5.41 inc VAT)
- Product Code: A1-5102
- Delivery Time: 3 - 5 days
- Brand: TECO
- Model: WM50x250
- Weight: 680.00g
50x250mm Welded Masonry Joist Hanger
Width: 50mm
Height: 240mm
Weight: 680g
50mm x 250mm Welded Masonry Joist Hanger is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings. Long term safe working load = 3.5 kN.
Installation of 50x250mm Welded Masonry Joist Hanger
- The back plate of the hanger should lie flat against the vertical masonry support,
- The masonry flange should never be placed in dry slots,
- Masonry flange should have a minimum of 3 courses (675mm masonry) above,
- Use correct strength mortar as per British Standard,
- Both supporting and above masonry should be allowed to mature before any load is applied,
- Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm,
- Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent,
- To provide lateral restraint HD Straps should be used,
- Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa.
Specification
- Pre Galvanised Steel S280GD+Z275
- Also available in Stainless Steel
Certification
- Manufactured to EN 845 - 1:2013.
- Galvanised steel to EN10346 DX51D Z275 or grade 1.4301 austenitic stainless steel to EN 10088 - 2.
- Tested by CERAM Research Ltd Notification Body No.1289.
Masonry-Hangers_data_sheet.pdf
Brand: TECO
Model: WR50X225R100
Delivery Time: 2 - 4 days
50mm x 225mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.70
£5.64 inc VAT
Brand: TECO
Model: TBHEX10x75
Delivery Time: In stock, 1-2 days
10x75 Hex Head Self Tapping Anchors for use in a variety of base materials. The self tapping action provides a positive anchorage in concrete, brick, stone and blocks. Zinc & Yellow Passivated.Length: 50mmDrill Dia: 6mmHole Depth Embedment: 10mmMax Fixture Thickness: 20mmClearance Hole (Fix..
£41.40
£49.68 inc VAT
Brand: TECO
Model: FHMR115
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.06
£1.27 inc VAT
Brand: TECO
Model: TCSS 76mm M12 SS
Delivery Time: In stock, 1-2 days
Diameter: 76mmTeeth Size: 1.2mmSingle Sided Stainless Steel Tooth Plate Timber Connector 76mm M12 is designed to improve bolt performance in timber joints. The connector's teeth must be embedded fully into the timber contact surface in order to achieve their design capacity...
£3.64
£4.37 inc VAT
Brand: TECO
Model: WNT - 75x295
Delivery Time: In stock, 1-2 days
75mm x 295mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainles..
£0.61
£0.73 inc VAT
Brand: TECO
Model: PY
Delivery Time: In stock, 1-2 days
5mm Anker-it Yellow Plug is a standard 5mm yellow coloured plastic plug for 5mm hole diameter and 22mm in length. FeaturesAnchor hole size - 5mmPlug length - 22mmMin. anchor hole length - 30mmWood screw size = 2.5mm to 5mm ..
£0.98
£1.18 inc VAT