75x295 Woody No Tag Joist Hanger
75x295 Woody No Tag Joist Hanger
Price: £0.60 (£0.72 inc VAT)
- Product Code: A1-5035
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: WNT - 75x295
- Weight: 192.00g
75x295 Woody No Tag Joist Hanger
Width: 75mm
Height: 295mm
Thickness: 0.8mm
Weight: 192g
75mm x 295mm Woody No Tag Joist Hanger is produced from 0.8mm thick pre-galvanised mild steel in accordance with the BS EN 10327:2004 DX51D+Z275 specifications. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request. Also available in Stainless Steel. Long term safe working load = 6 kN.
tag_install.png)
FIXING INSTRUCTIONS for 75x295 Woody No Tag Joist Hanger
- All holes should be nailed using 30 x 3.75 square twist nails or equivalent, for stainless steel products use 30 x 3.75 stainless steel annular ring shank nails.Always ensure that compatible corrosion resistant fixings are used, i.e. do not use galvanised fixings with stainless steel products or vice versa.
SPECIFICATION
- Joist bearing 60mm,
- Also available in Stainless Steel,
- Tested by Ceram Research.
Timber-to-Timber-Joist-Hangers.pdf
Brand: TECO
Model: WT-200/250
Delivery Time: In stock, 1-2 days
200mm Stainless Steel Housing Tie offers a practical and cost effective solution for masonry cavity walls in box form domestic dwellings of up to a maximum 10m in height. Used for cavities from 50mm to 70mm. Stainless Steel.Specification Fully tested to BS EN846-5:2000Meets the requirement..
£35.08
£42.10 inc VAT
Brand: TECO
Model: P8X50
Delivery Time: In stock, 1-2 days
8mm Universal Nylon Plug is a standard plug for 8mm hole diameter and 41mm in length. Suitable for hollow and solid base materials. FeaturesAnchor hole size - 8mmPlug length - 41mmMin. anchor hole length - 55mmWood screw size - 4.5mm to 6mm ..
£0.10
£0.12 inc VAT
Brand: TECO
Model: LD300B100
Delivery Time: In stock, 1-2 days
Galvanised Light Duty Restraint Strap 300mm Bent 100mm is designed for vertical restraint, for example fixing wall plates to masonry. The straps are produced from edge coated galvanised mild steel, also available in stainless steel. They are designed for 6mm and 25mm offset centr..
£0.53
£0.64 inc VAT
Brand: TECO
Model: FHM47/100
Delivery Time: In stock, 1-2 days
47mm x 100mm Single Piece Joist Hanger are designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. They are also suitable for many timber to timber applications by fixing the masonry flange securely to the timber or to steel beams using ap..
£1.80
£2.16 inc VAT
Brand: TECO
Model: NP170x175
Delivery Time: In stock, 1-2 days
170x175mm Galvanised Nail Plate is plate used to connect or repair timber. The plate has strengthening ribs for added rigidity. All holes are pressed countersunk to aid location of the nail and to give a flush finish. Made from Galvanised steel EN 10346 DX51D Z275. InstallationUse appropri..
£82.50
£99.00 inc VAT
Brand: TECO
Model: WR44X200R100
Delivery Time: 2 - 4 days
44mm x 200mm Welded Return Joist Hanger is designed for similar applications and installation as the standard Masonry Joist Hanger. The return adds additional lateral support by wrapping around the back of the masonry or timber. The hanger has a 25mm drop on the return flange as standard, but a..
£4.60
£5.52 inc VAT