125x600mm Woody Long Leg Joist Hanger
125x600mm Woody Long Leg Joist Hanger
Price: £5.81 (£6.97 inc VAT)
- Product Code: A1-5177
- Delivery Time: In stock, 1-2 days
- Brand: TECO
- Model: LL - 125x600
- Weight: 647.00g
125x600mm Woody Long Leg Joist Hanger
Width: 125mm
Height: 600mm
Thickness: 1.4mm
Weight: 647g
125mm x 600mm Woody Long Leg Joist Hanger is produced from 1.5mm thick pre-galvanised mild steel produced in accordance to EN 10346 DX51D+Z275 with 50mm joist bearing. It is especially designed for loft conversion projects. This joist hanger ls also available in stainless steel. The product also offers substantial safe working load of 7,11kN at 1.5mm deflection, meaning there is no fear of the hanger breaking off, if the given load of 28,04kN are respected. The hangers have been accordingly tested by Ceram Research, whereas the test results are available upon request.
.png)
FIXING INSTRUCTIONS for 125x600mm Woody Long Leg Joist Hanger
It is advisable that 30 x 3.75 Square Twisted nails are used for nailing the holes during installation.
SPECIFICATION
- Joist bearing 50mm.
- Also available in Stainless Steel.
- Tested by Ceram Research.
Long-Leg-Hangers_data_sheet.pdf
Brand: TECO
Model: TFT50
Delivery Time: In stock, 1-2 days
50mm Timber Frame Ties are suitable for tying masonry outer cladding to softwood structural framework of domestic dwellings and industrial/commercial buildings up to 4 storeys and not greater than 15m in height. Suitable at a density of 4.4 ties per square meter for buildings anywhere in the South E..
£0.31
£0.37 inc VAT
Brand: TECO
Model: FHMR140
Delivery Time: 2 - 4 days
Single Piece Masonry Hanger Lock Plate is an additional element to use with the FHM Single Piece Joist Hanger and the WM Welded Masonry Joist Hanger. This plate is easily be transformed into a hook over joist hanger. No special tools or rivets are required. Just insert Lock ..
£1.34
£1.61 inc VAT
Brand: TECO
Model: DPC100
Delivery Time: In stock, 1-2 days
100mm Damp Proof Course - DPC provides damp proof protection, preventing ingress of external moisture. Suitable for brick, block, stone or concrete walls. Suitable for vertical and horizontal applications. Specification500mu. Produced to BS 6515:84. Suitable for withstanding a compressive load ..
£3.41
£4.09 inc VAT
Brand: TECO
Model: PB8/12
Delivery Time: In stock, 1-2 days
Plaster depth 8-12mm uPVC Plaster Angle Beads are designed for use externally where galvanised bead cannot be used or where they are preferred to stainless steel. They are also used internally in high moisture content areas or where pro longed drying out periods may be necessary. An impact..
£3.94
£4.73 inc VAT
Brand: TECO
Model: GB375
Delivery Time: In stock, 1-2 days
Gallows Brackets provide support when removing an internal chimney breast. Painted - Red or Grey Primer. Supplied in pairs. SpecificationHorizontal and vertical angle 50 x 50 x 5mm.45 degree angle 25 x 25 x 3mm.Holed for M12. Finished in red Oxide Primer.InstallationThe chimney breast is l..
£36.94
£44.33 inc VAT
Brand: TECO
Model: ERSS3
Delivery Time: In stock, 1-2 days
Stainless Steel External Render Stop Bead is predominantly used to form a neat bell shaped edge at the bottom of an external render finish, thus protecting the edge and acting as a runoff for when rainfall occurs. Use on traditional wet 2 or 3 coat plaster application. Galvanised product to be used ..
£5.42
£6.50 inc VAT